diff --git a/opendtu-logger/DOCS.md b/opendtu-logger/DOCS.md
index e4ab6b3..23eb705 100644
--- a/opendtu-logger/DOCS.md
+++ b/opendtu-logger/DOCS.md
@@ -44,12 +44,14 @@ With the database initialised, we can now setup OpenDTU Logger. Add the [add-on
 
 - If you're using Expaso's TimescaleDB add-on, the `db` setting will **not** require any changes.
 - **In the `opendtu_address` field, enter the *IP address* or *hostname* of your OpenDTU.** E.g.: `192.168.1.5` or `opendtu.local`.
-- If your OpenDTU is password-protected
+- If your OpenDTU is password-protected, setting the following variables is required. Otherwise, it is optional, but still recommended.
   - `opendtu_auth`: Enable this setting
   - `opendtu_username`: `admin`
   - `opendtu_password`: `replace_with_your_password`
 - In `tz`, enter your timezone. The default is "Europe/Amsterdam". If you are in a different location, choose your timezone from [this list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List).
 - Optionally, if you don't want to use TimescaleDB, disable `timescaledb`.
+- It is recommended to leave the `log_level` set to `INFO`.
+  - Valid options are `DEBUG`, `INFO`, `WARN` and `ERROR`.
 
 Save the configuration, go to the "Info" tab and start OpenDTU Logger.
 
@@ -100,6 +102,11 @@ By default, OpenDTU sends data every 5 seconds. This can be adjusted by changing
 
 Using the aforementioned steps, you should now have a working OpenDTU Logger setup. However, it is important to keep your data safe. [Expaso recommends](https://github.com/Expaso/hassos-addons/tree/master/timescaledb#usage) changing the default postgres `homeassistant` password. I recommend following their recommendation and also installing the pgAdmin4 add-on using the [instructions](https://github.com/Expaso/hassos-addons/tree/master/pgadmin4) they provide. In case you're doing this after setting up OpenDTU Logger, remember to also update this password in the OpenDTU Logger config and the Grafana data source connection settings.
 
+## Troubleshooting
+
+- Error: `"level":"INFO","msg":"websocket: bad handshake"}`
+  - Authentication is probably misconfigured. Ensure `opendtu_auth` is set to enabled and a valid `opendtu_username` and `opendtu_password` are set.
+
 ## Feedback
 
 If you'd like to provide feedback about this project, or in case you'd like to ask questions, please refer to [this page](https://pieterhollander.nl/author/pieter-hollander/) for contact information (e-mail, Github or LinkedIn), or use the [contact form](https://pieterhollander.nl/#contact) on my website. You can also respond by placing your remarks in [this discussion on Github](https://github.com/tbnobody/OpenDTU/discussions/1842).